YM Series Cutting/Engraving Machines

        The YM machines share many design features with the CMA line. There are however special features which have been added to serve particularly the awards and trophy shops. The most important are:

•     A vertical travel table for engraving material up to 6" thick.

•     A rotary engraving attachment for cylindrical and cone shaped parts.

 

MODEL	YM-535A	YM-535B
Complete system starts at only	USD 12,900
Purpose	Cutting/Engraving
Rotary Attachment	Optional	No
Work Area - inches	14 x 20 (choice of aluminum slats or steel honeycomb)
Max Sheet Size - inches	14 x 20	24 x 48
Max. Material Thickness - inches	6	1.5
Vertical Table Stroke - inches	5	NA
Laser Type	Sealed CO2 DC excited
Laser Power -Watts	60
Engraving Speed - Max - in/sec	27
Engraving Depth - Max - inches	0.140
Min Letter Size - inches	0.040
Resolution - inches	0.001
Cutting Accuracy - inches	0.002
Repeatability - inches	0.0004
Power Supply - V/Ph/Hz	220/1/60
Connected Load - Watts	1250
Drive Motors	Micro Stepper
Graphic Formats	BMP, GIF, JPEG, PCX, TGA, TIFF, PLT, CDR, DWG, DXF
Dimensions - inches	36 x 26 x 47
Weight - lbs	280

Rotary Fixture for YM-535A

Engrave graphic designs, pictures and text on parts up to 5.5" diameter and 18" long. The right end of the fixture also adjusts vertically, allowing cylindrical as well as conical parts to be engraved.

Setting  up the machine takes literally seconds. Just place the fixture into the machine and plug the motor cord into the outlet for the Y axis. Programming is identical to X/Y programming.